Часто задаваемые вопросы

Site Map > Руководства > Часто задаваемые вопросы

1. Вопросы общего характераback to top

Q1: The player has less memory than normal, and restarts displaying "format error", "I/O error" or "disk error" when I upload more than 128/256/512/etc MB, OR it always reestart after playing song X.

What you can do is to format the player using the tool that came on the the latest version of the "MP3 Player Utilities", available in Программа обновления прошивки S1 mp3 плеера. Do a complete format and don't set any encripted drive.

If this does not help, try the "disk management", reached at "Control Panel -> Administrative tools -> computer management". Right click the mp3 player partition, choose "format". Use "FAT" or "FAT16" (NOT FAT32!)

If it does not work, you can try a low-level format using this tool :HP formatting tool

This is a known problem. It is some bug in the firmware

If formatting does not help, you should check if the memory chip inside you player has the capacity that the players claims.(see and Samsung K9W8G08U1M (FLASH-память))

(there is an ongoing discussion about this in the forums

Q2: Can the s1mp3 can recharge the battery while it is connected to pc??

If you player has an internal recharcheable battery, it will include a special internal circuit to do that.

If your player does not have this circuit, you best recharge your batteries on proper chargers to avoid acidents. However, there is a wiki article that explains how to make a simple circuit to drive power to the battteries.

Q3: Есть ли новая прошивка для моего плеера?

??ервое: Если Ваш плеер работает, оставьте всё как есть, не обновляйте прошивку!!

"??овой" прошивки для S1 mp3 плееров не существует, есть только много разных версий одной и той же прошивки. ??о для каждой платы нужна своя прошивка. Каждая прошивка сделана специально для определённого типа платы, поэтому, если Вы устаналиваете в плеер неподходящую прошивку, он перестаёт работать!

Q4: Как сделать, чтобы работала функция записной телефонной книжки?

Вам нужно загрузить подходящую версию программы Telbook.exe, которая создаёт файл записной телефонной книжки telbook.bin, содержащий в себе всю контактную информацию. ??осле этого, в разделе "TelBook" главного меню плеера Вы должны импортировать этот файл в плеер. ??ока мы нашли две различных версии программы Telbook.exe, которые генерируют разные файлы telbook.bin. Возможно, версия Вашей Telbook.exe не подходит к Вашему плееру, попробуйте другую версию. ??рограммы можно найти в разделе "Программы".

Q5: Как сделать, чтобы работала функция lyrics?

Смотрите в подразделе "Как сделать, чтобы плеер показывал слова песни (lyrics)".

Q6: Каждый раз, когда я нажимаю кнопку, цвет подсветки меняется! ??то мне надоело! Как это исправить?

Вы можете выбрать цвет подсветки в подменю "Back Color" меню "System".

Q7: Система сообщает, что устройство находится в режиме "ADFU server", и доступ к нему она получить не может.

??то означает, что Ваш плеер находится в режиме восстановления прошивки. Теперь Вам нужно найти для него подходящую прошивку и установить её. Дополнительную информацию можно получить в подразделе" Поиск подходящей прошивки для плеера".

Q8: I can't play all the songs I put on my player(only the first 99), what can I do?

The player's firmware is limited to 99 files per folder. See more info here : .

Q9: How do I change/add a language to my player?

See this topic : http://forum.s1mp3.org/viewtopic.php?t=267

Q10: how can i change the order that the s1mp3 plays the songs?

See how to set the playing order at .

Q11: I can't open text files? why?

See .

Q12: What is the difference between actions s1mp3 players (with atj2085 or atj 2075), and the sigmatel STMP35xx?

Not very much, in the way that they both play music. Sigmatel claims that the atj2075 and 2085 are copies of their SMTP25xx series, and has even filed a lawsuit against them! Apart from the different looks, they have totally incompatible firmwares, and (some of) the sigmatel players have a slot for an extra Secure Digital flashcard. (note: this project is about the s1mp3 player, NOT the sigmatel ones ;) )

Q13: When playing songs (sometimes/always) there is a low "buzzing" sound in the background of the song.

This has only one explanation: interference. The s1mp3 player is quite cheap hardware, so it is not shielded from interference very well. In fact, it even creates it's own interference. In some hardware versions, severeral of the memory data lines run along the audio lines, so everytime the memory is read or written, there will be interference from the memory with the audio.

This also explains the absence of interference during radio playback (as reported sometimes): the memory isn't really used then, so there is no interference.

There is, althought, a way to fix that problem , it appears to be due to a decoupling tantalum capacitor not being big enough. The capacitor is on the battery side of the board and is between the hold switch and the -ve volume button. I found that soldering another surface mount 68uF tantalum across it fixed the burbling noise on memory playback. try holding a largeish (220uF) electrolytic against this capacitor's leads to see if it cures the problem , itmay cause reboots due to static/whatever, but when it doesnt cause a reboot it may/should reduce the noise, if it does then try soldering in a permanent fix.

Q14: My player has always a bit less memory available then it claims. Why?

This is normal and happens with all the S1MP3 players. The firmware reserves a "small" (up to 20MB) portion of the flash memory to system usage.

Q15: My player can't find any FM station.

The player uses the earphones cord as an antenna. Try to hold it stretched as much as you can for better reception. Sometimes, the radio signal is just not strong enough. There can also be a strong signal from a local radio station "blocking" any other stations in the area, even if normal radios receptors are working normally.

Q16: Can I change the recording date?

Yes. There is an opntion on system menu that let you change the system time. Note that eveytime the player is disconnected from a power source (you change the batteries) the time will reset.

Q17: How can I have a full screen 200x200 video for my 1.5'' mp4 player?

Use the latest encoding tool, and inform it to use the 200x200 resolution. If you s1mp3 still clips the video while playing it, your current firmware does not support full screen mode.

Q18: What type is my player ?

Remember, for the right firmware, you'll have to open your player and take note of the board ID number. Just categorization won't help. You can check out all the known S1mp3 types here.

Q19: Can I replace the internal rechargeable battery?

Of course! But make sure to check the voltage, use the same voltage your older battery has!

Q20: Help! My S1mp3 can't show the music inside my subfolders!

The S1mp3 does not support subfolders. Read the

Q21: My player works with batteries but not when connected to the USB port, why?

First, check the cables, eliminate then, if possible. Then, test the USB port with other USB devices, maybe the problem is at the motherboard side.

If cabes and mobo are ok, probably there is something wrong with the USB conector on the S1mp3. Open it and check for dust, clean it, check the solders on the USB connectors.

If all these tips does not work at all, probably your ATJ2085 chip is phisycally damaged.

Q22: I get a "Hard Error" when trying to enter the FM application.

If you get a "hard error", that's because your S1mp3 does not have the FM chip, or the connection between the the FM chip is broken, or you have a radio chip that is not supported by your firmware. Have your S1mp3 changed or fixed.

Q23: Does the S1 MP3 Player support Digital Rights Management? I can't download music I've bought because the licence won't copy onto the player.

No, It does not. DMR is to be supported on the next generations of the s1mp3-type player.

Q24: My player keeps "restarting" similar to the static electricity problem but i have completely isolated the player from static according to the instructions. It happens every time I get to a specific track as if it won't play any further.

This is related to the Memory Issue. See about it on the FAQ.

Q25: How can you work out your model name of my s1mp3 ?

Most S1mp3 come as unbranded and even the ones that have a model name on the case aren't uniquely identified by this information. The only reliable information to identify a player is the board ID.

Q26: The "scan" function of my FM radio does not work or is disabled.

There are some FM chips that does not support the scan mode. There doesn't seen like there is much that can be done to overcome this issue.

2. Вопросы по восстановлению неработающих плееровback to top

Q1: МОЙ MP3 ??ЛЕЕ?? ??Е??ЕСТАЛ ??А??ОТАТЬ!!! ??ОЖАЛУЙСТА, ??ОМОГИТЕ!! ??О-МО-ГИ-ТЕ@@@@!!!!

Успокойтесь и глубоко вдохните. Внимательно прочитайте "Руководство по восстановлению". Затем попытайтесь выполнить инструкции, описанные в этом руководстве. ??то базовая процедура, подходящая для всех. Удачи Вам, и кроме этого Вы можете рассчитывать на нашу полную поддержку на форуме.

Q2: Как мне найти прошивку для моего XXXXX плеера?

Если Вам действительно нужна прошивка для восстановления неработающего плеера, смотрите подраздел "Поиск подходящей прошивки для плеера".

Q3: Что означает "Unknown flash type" или "Flash not responding"?

??рактически это означает, что Ваша программа обновления не поддерживает Ваш плеер, или в Вашем плеере неподходящая/испорченная прошивка. Чтобы решить эту проблему, Вы можете или взять другую версию программы обновления, или заставить плеер перейти в режим восстановления прошивки. ??олее подробную информацию можно найти в разделе "Руководство по восстановлению".

Q4: ??а моей плате нет номера! Что мне делать?

??оищите получше. ??омер может быть напечатан очень маленькими символами, в любом месте платы. Он может быть даже под плоским кабелем ЖК-дисплея или под стикером в месте отсека для батареи.

Учтите, что под номером мы подразумеваем все знаки, напечатанные белым цветом на зелёной плате (смотрите также подраздел "Номер платы - надёжная идентификация плеера").

Мы пока не видели плееров без номера платы, каждый может его найти, если хорошо поищет.

Q5: Моя система не видит плеер, ничего не помогает! ??осоветуйте, пожалуйста, что-нибудь.
P.S. Я уже пытался замыкать выводы микросхемы памяти.

??опробуйте, пожалуйста, выполнить процедуру, описанную в подразделе "Установка драйверов и обнаружение плеера системой Windows".

Q6: My player only works connected to the USB port.

This shall be a hardware fault. Open the player and seek for bad solders.

Q7: I formatted my player, and now it doesn't work anymore, what do I do?

You probably formatted your player with the "FAT32" filesystem. the S1mp3 player uses the "FAT16" filesystem, and MOST players don't understand FAT32. (some can) You can fix your player by simply reformatting it, but this time select "FAT16" in the filesystem box. Note: "FAT16" is also known as "FAT"

Q8: My s1mp3 can't work using power from batteries, but works using power from USB.

Make sure you are using a fully charged battery.

Manually wire the battery to the terminals on the s1mp3, to make sure they have contact.

If it still does not work, you should open up the player and see if any of the battery pin is loose/broken/shorting. Clean both contacts, and check if there are any other thing on the player that may be causing the short.

If this does not help, then it's very likely that this is a hardware fault on the DC-DC convertor - get the player replaced with the seller.

Q9: Where can I find the adfuud.sys file?

See

Q10: I get a "device write protected, please remove write protection" when I start the FW upgrade program.

Flip the hold swith! :) It is also possible that, because of a wrong firmware update, the button mapping has gone crazy, and your hold switch has traded places with other buttons. To overcome this, simply push ALL the buttons while you plug in the player, that way you are always "flipping" the "hold switch" (where-ever it has hidden itself) If still doesn't work, follow the

Q11: Where can I find a spare glass?(the one who protects the LCD screen)

You can try to order a real glass in a jewelry store ...

Q12: The mp3 player shuts down by itself all the time (shows "starting"). What to do?

Read this :

Q13: When I copy mp3 format music files the player says there is a format problem in the file so unable to playing it.

Re-encode the problematic music files using LAME. If the device also reestarts, it could be the memory issue, check the FAQ for that too.

Q14: The player X looks like the player Y, can I use Y's firmware dump on X ?

Only if you know that the Board ID for both players is the same. The external (brand, looklike, firmware version) say nothing about the player internal hardware.no more headers to display with put_header()

Q1: Можно ли менять текст/графику, содержащиеся в прошивке?

Да, можно. ??рограмма S1fwx, написанная Wire, может сделать дамп прошивки плеера, после чего, используя программу S1res, можно менять в ней текст и графику, это работает даже для OLED-плееров. ??ти программы можно найти в разделе "Программы".

Q2: В моём плеере подсветка только одного цвета. Можно ли обновить прошивку, чтобы получить больше цветов?

??ет, нельзя. В плеерах с разными цветами подсветки стоят три светодиода подсветки разных цветов: красного, зелёного и синего. ??азличные цвета подсветки получаются смешиванием света от этих светодиодов (например, красный + синий даёт розовый/фиолетовый).

В плеерах с одним цветом подсветки стоит только один светодиод, поэтому они не могут сочетать цвета.

Светодиоды находятся на плате ЖК-дисплея ("Плата ЖК-дисплея"), и их туда добавить нельзя!

Q3: Как сделать, чтобы мой плеер начал принимать FM-радио?

Если в плату Вашего плеера не впаяна микросхема радио, невозможно сделать, чтобы он начал принимать FM. ??о если в вашем плеере было радио, но оно пропало после обновления прошивки, Вы можете воспользоваться программой FW modifier (смотрите в разделе "Программы"), чтобы активизировать эту функцию в bin-файле прошивки.

Q4: Does the s1mp3 player support playlists? Maybe by firmware update?

Unfortunately, no. The s1mp3 player does not support playlists, not even with firmware upgrades. Remember, it is still cheap chinese import, no high tech iPod nano.

Q5: How do I change the battery type from 1,5V to 1,2V - rechargeable?

A program called "Fw modifyer", can do the job, available on Программа для изменения прошивки. Dump your firmware using s1fwx(Программа для изменения прошивки)(don't forget the upper "F"), modify it and reburn on the player. If the player refuses to accept the changes, you might have to "kill" the player with an unknown firmware and then finally flash the firmware. And this might be a hard work, that might not reward you. The only thing that changes is over the battery indicator level.

Q6: Можно ли изменить предустановленные позиции эквалайзера?

Может когда-нибудь это будет возможно, но пока мы понятия не имеем, как это сделать. Если у Вас есть какие-нибудь идеи по этому поводу, пожалуйста, напишите нам!

Q7: What are all those .7z files?

.z7 is the extension for 7-zip.

7-zip is one of the most powerfull compressing programs you'll find, and, best of all: It's open source.

you can find the official 7-zip program at: www.7-zip.org

If you want to use something else:
winrar also extracts 7-zip.

Q8: How can I change my mp4's interfrace with cool backgrounds?

For that, you'll have to extract your player's firmware with s1fwx. then you can unleash the awesome power of s1res on your extracted firmware.
S1res allows you to change ANY part of a firmware, including menu pictures.
Where all the pictures are hidden changes from firmware to firmware, so you'll have to look for yourself (but UI30.res is always a good place to start)
WARNING: ALWAYS keep an UNMODIFIED, UNCHANGED backup of your extracted firmware, just in case something goes wrong. (And, remembering Murphy's law: it _will_ go wrong)

Q9: How can I change the button configuration?

See no more headers to display with put_header()

Q1: Какова цель проекта?

Мы хотим разработать прошивку с открытым исходным кодом для S1 mp3 плеера, чтобы была возможность максимально использовать возможности этого плеера. Если у нас получится это сделать, можно будет использовать все возможности этого великолепного плеера!

Q2: Как я могу помочь продвижению этого проекта?

Вы можете помочь проекту разными способами. Самый постой из них - это нажимать на баннеры :).

Если Вы хотите помочь, зарегистрируйтесь, пожалуйста, в группе обсуждения и предложите там свою помощь. Сообщите, какие у Вас есть навыки (C, встроенное программирование, HTML/создание сайтов, программирование на макроязыках, и т.д.). Вас ждёт МАССА работы! ;)

Конечно, Вы можете посещать наши форумы и помогать там ;).

Q3: Есть ли у вас форум или чат?

У нас есть форум, на сайте, и группа обсуждения. В группе обсуждения, в основном, обсуждаются вопросы ТОЛЬКО по разработке прошивки. ??о поводу неработающих плееров смотрите на форумах.

Примечание: Мы не всегда успеваем вовремя переводить вопросы на этой странице. На этой странице можно найти приведённые здесь вопросы и ответы на русском языке, а также некоторые другие часто задаваемые вопросы и ответы на них.

Meet us at the mail list
Site translator(Russian) : Бюро переводов "TRANSLATION-GROUP" - http://perevedy.ru
Protected by the FreeBSD Documentation License - click for details